Nail punching shear resistance
Nail punching shear resistance Rp defines the force that the nail head can transfer to the concrete slope facing. For each nail type, the resistance can be entered directly or calculated based on the head shape, facing thickness and selected concrete design standard. For a nail without anchorage in the facing, the punching shear resistance is taken as zero.
Calculation of resistance
The program checks two perimeters. The first follows the edge of the nail head; the second is offset from its edge by the thickness of the concrete facing. For each perimeter, its length is multiplied by the corresponding resistance per unit length. The smaller of the two forces governs.
![]()
where | Rp | – | nail punching shear resistance [kN] |
Lmax | – | nail head perimeter [m] | |
Qmax | – | maximum resistance per unit length at the head perimeter [kN/m] | |
Lc | – | length of the control perimeter at a distance of hs from the edge of the head [m] | |
Qc | – | resistance per unit length at the control perimeter [kN/m] | |
hs | – | concrete facing thickness [m] |
Circular head
For a head with a diameter of D the two perimeters are determined using the following equations
![]()
Rectangular head
For a head with dimensions ah and bh the control perimeter consists of four straight segments and four quarter circles with a radius of hs.
![]()
Resistance per unit length according to the selected standard
The following equations describe the calculation in GEO5.
EN 1992-1-1 (EC2) or EN 1992-2
The program calculates the resistance of the unreinforced cross-section Qc = VRd,c according to 6.4.4 (2) and the maximum resistance at the column perimeter Qmax = VRd,max according to 6.4.5 (3)
![]()
The program includes default values of the coefficients ν, νmin - these values can also be modified in the program depending on the National Annex used.
ČSN 73 1201 R
![]()
PN-B-03264:2002
![]()
BS 8110:1997

IS 456
![]()
ACI 318-19
The program calculates the resistance of the unreinforced cross-section Qc = Vc according to 22.6.5.2 and the maximum resistance at the column perimeter Qmax = Vmax according to 22.6.6.3

AS 3600-2018
![]()
SNiP 52-101-2003
![]()
GB 50010-2010
The program calculates the resistance of the unreinforced cross-section Qc = Fc according to 6.5.1 and the maximum resistance at the column perimeter Qmax = Fmax according to 6.5.3
![]()
βh = 0.9 for hs ≥ 2000mm
βh = 1 for hs ≤ 800mm, intermediate values are interpolated
NZS 3101-2006
![]()
CSA A23.3-14
The program calculates the resistance of the unreinforced cross-section Qc = Vc according to 13.3.4.1 and the maximum resistance at the column perimeter Qmax = Fmax according to 13.3.9.2
![]()
NBR 6118-2023
The program calculates the resistance of the unreinforced cross-section Qc = VRd1 according to 17.4.2.2 and the maximum resistance at the column perimeter Qmax = VRd2 according to 17.4.2.2
![]()
SIA 262:2025
The program calculates the resistance of the unreinforced cross-section Qc = VRdc according to 4.3.6 and the maximum resistance at the column perimeter Qmax = VRd,cmax according to 4.3.6.5.7
![]()